Sensorflow I (Wall-mounted)

Description: The Sensorflow I is a single temperature water control unit. The water flow is controlled by a solenoid valve from a 240/24 volt power pack. There are multiple time choices, one of which is selected at the time of installation. Sensorflow systems can be connected to any standard spout or outlet.
	Click here for brochure
	Features Sensorflow systems have intelligent sensors which must be deliberately activated Sensors can be in the wall cavity or on the wall Any standard spout or outlet can be used. Sensorflow systems can be used with thermostatic mixing valves or tempering valves 5 Year warrantee
	Schematic

How the Sensorflow System II Works: Put hands directly under the outlet of the spout at the level of the sensor. Water will flow for a maximum of 20 seconds. Should hands be removed while soaping, the water flow will stop and will only restart when they are directly under the outlet again. To clean the basin without activating the water flow, quickly wipe past the sensor range with a cleaning cloth.