|
Danfoss Flomatic Pressure Reducing Valves are designed to reduce and
control water pressure in residential and commercial water systems.
Model C150 which range from 15mm through to 50mm. These will reduce a
high inlet pressure - eg1400 kPa down to 500 kPa. They are suitable for
hot water to 82 degrees C and the outlet is adjustable to 500 kPa or 350
kPa. These pressure limiting valves deliver a constant pressure and do
allow pressure creep when there is no flow.
Model CF101 which range from 65mm through to 150mm. These are a flanged
pressure reducing valves which will reduce a high inlet pressure - eg
1800 kPa down to 500 kPA. Also suitable for hot water to 82 degrees C.
These valves are also used as ratio valves which are commonly used in
multi story office buildings to reduce water in flushometer systems.
Note - PRV's may be used in a 'dual valve' arrangement so to control
flow rates when the demand is low, to peak demands where the flow rate
requirement increases. - contact M A Griffith for further assistance.
These are used in domestic homes, commercial apartment buildings, office
towers, basically anywhere where the pressure needs to be reduced and
controlled we have a
water pressure reducing valve that is suitable. |